Managing laboratory waste requires controlling the biological risks associated with cultures, samples, contaminated materials and effluents, while taking into account the diversity of waste produced and the site’s organisation.
Among the world leaders in infectious waste treatment, Ecodas designs and manufactures equipment in France that lets laboratories treat their solid or liquid infectious waste directly on site. Our turnkey installations are configured according to the volumes of waste produced, technical requirements and the laboratory’s operation.
Infectious and biological laboratory waste
Laboratories can generate different types of waste requiring specific handling. Some carry a biological or infectious risk and, depending on the laboratory’s activity, may fall under the clinical waste category. This can include cultures and samples, contaminated microbiological material, sharps, waste soiled with blood or body fluids, and infectious liquids and effluents.
Ecodas equipment treats this solid or liquid infectious laboratory waste, with a configuration suited to the material’s characteristics and the site’s operation.
Treatment aims to remove the infectious risk, making it easier to manage waste after decontamination and direct it towards a general waste stream or a recovery route.
On-site treatment of laboratory waste
On-site treatment of infectious waste produced in laboratories simplifies its management and gives better control over associated costs, while supporting a sustainable approach.
The Ecodas solution combines shredding and steam sterilisation within the same sealed chamber. Waste is brought to 138°C at 3.5 bar, with a 10-minute sterilisation hold.
Fully automated and easy to control, this process treats solid or liquid infectious waste simultaneously in the same machine.
After treatment, waste volume can be reduced by up to 80% and weight by up to 40%, depending on the waste. Environmentally friendly, the process uses no chemicals, combustion or polluting atmospheric emissions.
Our equipment covers capacities from 100 to 2,500 litres per cycle. Each installation is defined according to the nature and volume of the waste as well as the laboratory’s operating pattern. Ecodas then supports the project through installation, commissioning and maintenance of the solution.
Frequently asked questions about laboratory waste treatment
Find the answers here to the main questions about laboratory waste and its treatment with Ecodas solutions.
What laboratory waste can be treated with Ecodas systems?
Laboratory waste that is contaminated or may carry an infectious risk, some of which falls under the clinical waste category, requires specific handling. It can include cultures and samples, contaminated microbiological material, sharps, waste soiled with blood or body fluids, and infectious liquids and effluents.
Ecodas solutions treat this waste in solid or liquid form to remove the infectious risk before it is directed towards the household waste stream or a recovery route.
How is infectious laboratory waste treated?
The Ecodas system shreds infectious waste and then sterilises it with steam within the same sealed chamber. Shredding reduces and homogenises the waste to help the steam act at the core of the material.
The cycle is fully automated and treats both solid and liquid waste. After treatment, the waste is decontaminated, significantly reduced in volume, and can be directed towards a general waste stream or a recovery route.
Which laboratory waste should not be presented as compatible?
Laboratory waste must be directed towards a route corresponding to its nature and the risk it presents.
Chemical waste, such as solvents or reagents, as well as radioactive waste, requires handling separate from infectious waste.
Ecodas solutions treat solid or liquid infectious waste, including cultures, samples, contaminated materials and effluents that may contain pathogens.