Infectious liquid waste treatment
Managing infectious liquid waste requires controlling the biological risk before discharge, while meeting the sanitary and environmental requirements of each facility.
A pioneer in infectious waste treatment, Ecodas designs and manufactures equipment in France capable of treating infectious liquid waste, alone or together with solid waste. Our turnkey installations rely on a steam sterilisation process in a sealed chamber and are configured to the nature and volume of the waste to be treated as well as the site’s technical requirements.
Infectious liquid waste and hospital wastewater: definitions and risks
Infectious liquid waste is liquid that is contaminated or may contain pathogens. It includes in particular blood, various body fluids and liquid effluents produced by healthcare facilities, medical laboratories and food-testing laboratories.
Ecodas equipment treats all types of infectious waste, liquid as well as solid, through steam sterilisation. Liquid and solid infectious waste can be treated simultaneously in the same machine. Depending on the configuration chosen, the equipment can handle loads containing up to 90% liquid.
The aim is to remove the infectious risk before the waste is discharged. Sterilised effluents are discharged to the sewer network, while the solid fraction is then directed towards a general waste stream or a recovery route.
Treatment of infectious hospital effluents before discharge
The Ecodas patented process treats infectious liquid waste through steam sterilisation in a sealed chamber, within a fully automated cycle.
Effluents are brought to 138°C at 3.5 bar, with a 10-minute sterilisation hold, to neutralise the infectious risk before discharge. Easy to control, the cycle requires no intermediate handling of the waste.
After sterilisation, the machine’s design separates the liquid and solid phases. The sterilised liquid fraction can then be discharged to the sewer network, while the solid fraction continues on its own disposal route.
Running on steam, with no chemicals, combustion or polluting atmospheric emissions, the Ecodas process treats infectious liquid waste as close as possible to where it is produced, at healthcare facilities and laboratories, or at a specialist treatment centre.
Depending on the volumes to be treated and the site’s operating pattern, Ecodas carries out a tailored study to define the most suitable machine.
Frequently asked questions about infectious liquid waste
Find the answers here to the main questions about infectious liquid waste, Ecodas treatment solutions and their benefits.
What infectious liquid waste can be treated?
Ecodas equipment can treat various liquids carrying an infectious risk, in particular blood and body fluids such as pleural fluid, peritoneal fluid, pericardial fluid, amniotic fluid or synovial fluid. It can also treat liquid effluents produced by healthcare facilities and laboratories when they may contain pathogens.
How are infectious hospital effluents treated?
Decontamination of infectious liquid waste through the Ecodas process is based on steam sterilisation in a sealed chamber. Effluents are brought to 138°C at 3.5 bar, with a 10-minute sterilisation hold, to neutralise the infectious risk before discharge.
The fully automated cycle treats liquid waste alone or together with solid infectious waste, with loads containing up to 90% liquid. After sterilisation, the machine separates the liquid and solid phases: the sterilised liquid fraction is discharged to the sewer network, while the solid fraction joins a general waste stream or a recovery route.
Which facilities need infectious liquid waste treatment?
Treatment of infectious liquid effluents mainly concerns hospitals, medical laboratories and food-testing laboratories producing effluents that may contain pathogens.
Ecodas offers a turnkey solution suited to each facility. The project study takes into account the nature and volume of the waste, its liquid proportion, the site’s operating pattern and organisation, in order to determine the right machine, number of cycles and configuration. Ecodas can also run an operating-cost simulation, before supporting the customer through installation, commissioning and maintenance.