Managing medical waste requires identifying waste that carries an infectious risk and setting up a solution suited to the sanitary, technical and organisational requirements of healthcare professionals.
Among the world leaders in infectious waste treatment, Ecodas designs and manufactures equipment in France for the on-site treatment of clinical waste and infectious medical waste, solid or liquid. Our turnkey installations are configured according to the volumes produced, the facility’s operation and its technical requirements.
Medical waste generated by healthcare facilities
Medical waste covers waste generated through diagnostic, care, monitoring, treatment or laboratory activity. Among it, clinical waste and other waste carrying an infectious risk require specific treatment. This can include sharps, waste contaminated with blood or body fluids, dressings and swabs, certain laboratory waste, and infectious liquid waste and effluents.
Ecodas equipment handles infectious medical waste, both solid and liquid, with a configuration defined according to the volumes generated and the organisation specific to each healthcare facility.
The aim is to remove the infectious risk, simplifying waste management after treatment and enabling it to be directed towards a general waste stream or a recovery route.
On-site medical waste treatment solutions
Treating infectious medical waste directly where it is produced lets healthcare facilities simplify its management and limit the constraints linked to storage and transport.
The Ecodas system combines shredding and steam sterilisation within the same sealed chamber, in an automated, easy-to-control cycle. Waste is brought to 138°C at 3.5 bar, with a 10-minute sterilisation hold. After treatment, the material’s volume can be reduced by up to 80% and weight by up to 40%, depending on the waste. Environmentally friendly, the process uses no chemicals, combustion or polluting atmospheric emissions.
With capacities from 100 to 2,500 litres per cycle, the Ecodas range meets different production levels. Every project is studied to define the right configuration, and Ecodas then supports the customer through installation, commissioning and equipment maintenance.
Frequently asked questions about medical waste treatment
Find the answers here to the main questions about medical waste, its treatment with Ecodas solutions and the healthcare professionals concerned.
What medical waste can be treated on site?
Ecodas solutions treat medical waste carrying an infectious risk, solid or liquid, including sharps, waste contaminated with blood or body fluids, dressings and swabs, certain laboratory waste, and infectious body fluids and effluents.
How does on-site medical waste treatment work?
The Ecodas system combines shredding and steam sterilisation within the same sealed chamber, in a fully automated, easy-to-control cycle. Waste is brought to 138°C at 3.5 bar, with a 10-minute sterilisation hold, removing the infectious risk before the treated waste joins the household waste stream or a recovery route.
How should a healthcare facility size its treatment equipment?
Sizing depends on the volume of medical waste generated, its nature and the facility’s operating pattern. The Ecodas range covers capacities from 100 to 2,500 litres per cycle, and Ecodas studies each project to define the right model and configuration before supporting installation, commissioning and maintenance.